Operating Instructions of Cutting wheels in the Cutting Machines

The main content here is about the operation specification of the Cutting wheel in the use of the cutting machine, so that the operator can have a better and comfortable cutting experience. At present, we have the following cutting machines in the market for reference, like Angle grinder, Pneumatic cutting machine, Circular saw, Gasoline cutter machine etc. Normally the angle grinder is very frequently used in industry fields or small workshops, are you attention to the following matters when using the angle grinder?

 

Next I will start with the operation Instruction of cutting wheel on the angle grinder as example :

 

Step 1: Before working, you must wear labor protection equipment and check whether the equipment has a qualified grounding wire.

 

Step 2: It is necessary to check whether the cutting machine is in good condition and whether the cutting wheel is cracked or defective. It is forbidden to use diseased equipment and unqualified cutting wheels. As shown in the picture below, the qualified cutting wheel is correctly installed on the angle grinder.

 

Step 3: When cutting the material, do not use excessive force or sudden impact, and immediately turn off the power when there is an abnormal situation.

 

Step 4: The material to be cut should be clamped with a vise, one person is not allowed to hold the material and one person is not allowed to cut the material, and the person must stand on the side of the grinding wheel when cutting the material.

 

Step 5: When replacing the cutting wheel, wait for the equipment to stop stably, and carefully check the cutting wheel for confirmation then.

 

Step 6: During operation, abrasive tools and other items are not allowed on the rack.

 

Step 7: The cutting machine should be placed on a stable ground, away from flammable items, and the power cord should be connected to a leakage protection device.

 

Step 8: The cutting disc should be installed as required, and the trial start operation should be stable before starting to work.

 

Step 9: The clamping device should be safe and reliable to prevent accidental loosening of the workpiece.

 

Step 10: When cutting, the operator should cut evenly and avoid the front of the cutting blade to prevent accidents due to improper operation of the cutting blade.

 

Step 11: After the work is completed, the dust on the surface of the cutting machine should be wiped and the workplace should be cleaned, and rainproof measures should be taken for outdoor storage.

 

Let's work together safely and more efficiently!

 

Please contact BINIC ABRASIVE to know more about the abrasive industrial.

 

评论

发表评论

此博客中的热门博文

How To Use A Ceramic Velcro Sanding Disc

  Ceramic Velcro sanding discs  are a type of  abrasive tool  that are designed for use with angle grinders or orbital sanders. They are versatile, durable, and suitable for a wide range of sanding and  grinding  tasks. To use a ceramic Velcro sanding disc, follow these steps: 1.  Choose the appropriate   c eramic v elcro s anding disc: Make sure to select the correct ceramic Velcro sanding disc for the job. Consider the material you will be sanding , the desired finish, and the disc’s grit. 2.  Attach the disc: Attach the ceramic Velcro sanding disc to your angle grinder or orbital sander. Velcro sanding discs are designed to be easy to attach and remove, and can be secured in place using a Velcro backing. 3.  Adjust the speed: Make sure the speed of your angle grinder or orbital sander is set to the recommended speed for the ceramic Velcro sanding disc you are using. Too high a speed can cause the disc to wear out quickly, while too lo...
阅读全文

What is the Difference between Asphalt and Concrete Blades?

图片
   When it comes to construction and renovation projects involving roads, driveways, and other paved surfaces, the choice between asphalt and concrete is crucial. Equally significant is   selecting the appropriate blade for cutting and shaping  these materials. In this article, we will delve into the key differences between asphalt and concrete blades, considering their bond, design, price, and various applications.   Bond of the Blade: The bond of a blade refers to its ability to hold the diamond segments together. In the case of  asphalt  diamond  blades , a softer bond is used. Asphalt is a relatively softer material compared to concrete, and a softer bond ensures that the blade cuts through the material more effectively. This bond allows the diamond grits to wear out more rapidly, enabling the blade to maintain its cutting efficiency throughout the project. On the other hand, concrete diamond blades require a harder bond to withstand the abras...
阅读全文

Best Way to Sand Veneer and Lacquer

图片
   Veneer and lacquer are two popular finishes used in woodworking projects. While both provide a beautiful and durable surface, they require different approaches when it comes to sanding. In this guide, we will explore the differences between veneer and lacquer, and provide step-by-step instructions on how to properly sand both types of surfaces. VENEER VS. LACQUER: WHAT SETS THEM APART? Veneer and lacquer are two distinct types of finishes commonly used in woodworking. Understanding their differences is crucial to ensure  proper sanding techniques . Veneer  is a thin slice of real wood that is typically applied to a less expensive wood or composite substrate. It allows the appearance of expensive wood species without the cost. Veneered surfaces are often used in furniture, cabinetry, and decorative applications. Since veneer is made of natural wood, it can be sanded and refinished multiple times. However, sanding veneer requires delicate handling to prevent damage ...
阅读全文